BFJZX - ANTI-SETTING COMPOUND MIL-A-51027A

  • MSDS: BFJZX
  • Manufacturer: OCTAGON PROCESS INC
  • Product Name: ANTI-SETTING COMPOUND MIL-A-51027A
  • National Stock Number: 6850-00-656-0926
Product Identification

Product ID:ANTI-SETTING COMPOUND MIL-A-51027A
MSDS Date:05/17/1990
FSC:6850
NIIN:00-656-0926
MSDS Number: BFJZX

Responsible Party
OCTAGON PROCESS INC.
596 RIVER ROAD
EDGEWATER, NJ 07020-1105
US

Emergency Phone: 201-945-9400/800-424-9300(CHEMTREC)

Info Phone: 201-945-9400

Cage: 82925

Contractor
OCTAGON PROCESS INC.
EDGEWATER, NJ 07020 US

Telephone: 201-945-9400

Cage: 82925

Ingredients

CALCIUM OXIDE

CAS: 1305-78-8

RTECS: EW3100000

Fraction By Weight: 3%

OSHA PEL 5 MG/M3

ACGIH TLV: 2 MG/M3; 9192


SODIUM PHOSPHATE, TRIBASIC (SARA III)

CAS: 7758-29-4

RTECS: YK4570000

Fraction By Weight: 50.5%

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS


CALCIUM OXIDE

CAS: 1305-78-8

RTECS: EW3100000

Fraction By Weight: 3%

OSHA PEL 5 MG/M3

ACGIH TLV: 2 MG/M3; 9192

Hazards

Routes of Entry: Inhalation:YES Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:HEALTH HAZARD-ACUTE:DUST WILL IRRITATE
EYES, SKIN AND RESPIRATORY TRACT. CHRONIC:PROLONGED OR REPEATED
CONTACT WITH SKIN WILL CAUSE DEFATTING AND POSSIBLE DERMATITIS.
Effects of Overexposure:EYES:TEARING AND BURNING SENSATION.
SKIN:REDNESS AND DRYING. INHALATION:COUGHING AND SNEEZING.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

First Aid

First Aid:EYES:FLUSH WITH PLENTY OF WATER.IF IRRITATION PERSISTS,SEE
DOCTOR. SKIN:REMOVE CONTAMINATED CLOTHING.WASH WITH SOAP AND
WATER.IF IRRITATION PERSISTS SEE DOCTOR. INHALATION:REMOVE TO FRESH
AIR.GIVE CPR /OXYGEN IF NEEDED. SEE DOCTOR. INGESTION:SEE DOCTOR.

Fire Fighting

Flash Point:NONE
Autoignition Temp:Autoignition Temp Text:NONE
Extinguishing Media:NON-FLAMMABLE. USE EXTINGUISHING MEDIA APPROPIATE
FOR SURROUNDING FIRE.
Fire Fighting Procedures:NONE SPECIFIED BY MANUFACTURER.
Unusual Fire/Explosion Hazard:NONE SPECIFIED BY MANUFACTURER.

Accidental Release

Spill Release Procedures:WEAR DUST MASK,GLOVES AND GOGGLES. SCOOP UP
AND PLACE IN SUITABLE CONTAINER FOR REUSE OR DISPOSAL. FLUSH
RESIDUAL TRACES AWAY WITH WATER.
Neutralizing Agent:SODIUM BICARBONATE OR SODA ASH/SLAKED LIME MIX
(50/50)-ADD WATER TO FORM SLURRY.

Handling

Handling and Storage Precautions:STORE IN COOL,DRY,WELL VENTILATED
AREA.KEEP AWAY FROM OXIDIZERS.AVOID ANY PHYSICAL CONTACT.KEEP
CONTAINERS TIGHTLY CLOSED.
Other Precautions:AVOID EYE AND SKIN CONTACT.

Exposure Controls

Respiratory Protection:USE NIOSH/MSHA-APPROVED RESPIRATOR WITH DUST
CARTRIDGE IF TLV IS EXCEEDED.
Ventilation:LOCAL EXHAUST TO MAINTAIN EXPOSURE LEVEL BELOW TLV.
Protective Gloves:RUBBER OR NEOPRENE.
Eye Protection:CHEMICAL SAFETY GOGGLES.
Other Protective Equipment:RUBBER APRON, EYE WASH STATION.
Work Hygienic Practices:WASH THOROUGHLY AFTER HANDLING.
Supplemental Safety and Health
NONE

Chemical Properties

HCC:N1
Solubility in Water:COMPLETE
Appearance and Odor:WHITE GRANULAR, PRACTICALLY ODORLESS.

Stability

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:NONE

Disposal

Waste Disposal Methods:CONTACT YOUR LOCAL ENVIRONMENTAL OFFICER. KEEP
IN COVERED CONTAINERS PENDING DISPOSAL.DISPOSE OF IN ACCORDANCE
WITH FEDERAL.STATE AND LOCAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.